• No.5 Cape Coast Road - Takoradi
  • apaveghana@apaveoverseas.com
  • (233) 541 769 491

Testing & Calibration

Testing & Calibration

Pressure Gauges
Onshore Testing, Calibration and Certification of Pressure Gauges

Chart Recorders – Single & Dual Range
Onshore Testing, Calibration and Certification of Chart Recorders

Calibration equipment: Our equipment is rated up to 2600 bar. Currently in Ghana we could test with Dead-Weight Tester Model 580EHX up to 30.000 PSI. The standard accuracy of 0.02% is achieved between 6 and 1200 bar using software supplied to allow the user to compensate for the effects of gravity and temperature. In other parts of the pressure range, the standard accuracy is 0.025% from 1 to 6 bar, 0.03% from 1200 to 1800 bar and 0.04% from 1800 to 2600 bar.

Torque Tools & Wrenches
Periodic Onshore Testing & Re-calibration of various torque wrenches

Calibration equipment: NORBAR / TWL 1500 Torque Wrench Loader  / Minimum output torque – 1 Nm / Maximum output torque – 1500 Nm    Dimensions: LxWxH – 1720 mm x 730 mm x 345 mm

Digital Calipers, various Micrometers, Depth Gauges, OD Setting Bars
Periodic Onshore Testing & Re-calibration of various calipers

Calibration equipment: Grade 1 Tungsten Carbide Gauge Block Set / serial number P6946

Ultrasonic Testing Sets & Ultrasonic Thickness Meters
Periodic Onshore Testing & Re-calibration of various UT Sets
UT Calibration Blocks / Thickness Meter Step Blocks
Periodic Onshore Testing & Re-calibration of various UT Calibration blocks

Calibration equipment: GE Inspection Technologies N30 ultrasonic reference standard model 58474 (SN: 5375) / 4 Step Calibrated Thickness Step Block (SN: 11-1543) / Mitutoyo Digital Micrometer Type 293-832 (SN: 15089403)

Various digital multimeters, continuity & insulation testers etc.
Periodic Onshore Testing & Re-calibration of various multimeters

Various Welding Machines

Testing & Calibration / Safety Relief Valves Maintenance & Testing / fully equipped Workshops

Testing & Calibration of Chart Recorders and Pressure Gauges:

Our equipment is rated up to 2600 bar. Currently in Ghana we could test with
Hydraulic Dead-Weight Tester: DH-Budenberg 580 EHX

  • 580 EHX base with: 1 to 2600 bar (10 to 40,000 lb/in2) / Tester Serial #: 31082
  • Weight Set #: B1268 / Range: 10 to 30,000 lb/in2

Comparison Test Pump: WIKA CPP 1600-X Serial #: 70667

  • Process Calibrator: CPH6000
  • Pressure Sensors CPT6000 / Ranges: 100 bar, 1000 bar, 1600 bar, 2500 bar

Testing & Calibration of Torque Tools / Wreches:
NORBAR / TWL 1500 Torque Wrench Loader / Minimum output torque – 1 Nm / Maximum output torque – 1500
Nm Dimensions: LxWxH – 1720 mm x 730 mm x 345 mm

Testing & Calibration of Digital Calipers, various Micrometers, Depth Gauges, OD Setting Bars
2x Sets of Equipment
Grade 1 Tungsten Carbide Gauge Block Set / serial number P6946

Specifically designed SVR Test Bench “BARBEE” HP-6000-RV-6K
MODEL HP-6000-RV-6K SAFETY RELIEF VALVE TESTER INCLUDE:

  • CONTROL CONSOLE, CLAMPING FIXTURE, STORAGE BOTTLES, AND SURGE TANKS ALL MOUNTED ON HEAVY DUTY PLATFORM
  • CAPABILITY TO TEST 1/2” TO 12” VALVES BOTH AIR & WATER SERVICE
  • 100-TON CLAMPING FIXTURE , 4-ARM, STAINLESS STEEL SEAL PLATE WITH O-RING GROOVES, SAFETY INTERLOCK VALVE
  • HIGH PRESSURE AIR COMPRESSOR, 6000 PSI WITH 10 GALLON DOT STORAGE TANKS 6000 PSI (2EACH)
  • 10 GALLON AIR SURGE TANK 6000 PSI
  • 10 GALLON WATER SURGE TANK, 6000 PSI WATER SERVICE
  • ADDITIONAL 15 GALLON AIR SURGE TANK
  • SEAT LEAKAGE DETECTION SYSTEM PER API 527
  • DATA ACQUISITION SYSTEM COMPLETE WITH DIGITAL GAUGE WITH RS232 OUTPUT, SOFTWARE, HARDWARE, PC, PRINTER, KEYBOARD
  • NPT ADAPTER SET WITH QUICK DISCONNECTS
  • SEAT LEAK ADAPTER PLATES, CLAMPS & BUBBLE JAR

  • Different ranges Calibrated Measurement Equipment (Pressure Gauges)
  • Lapping Sets
  • All needed flanges, hoses, regulator valves, connections, adapters (various types & sizes)
  • Painting facilities
  • Tag plates & traceability
  • Transport packing solutions / inlet & outlet protection
  • All needed tools & consumables

 

Maintenance, Repair & Testing of Control Valves

Storage Facilities
Storage of maintenance kits & different valves models spare parts

  • Categorization by manufacturers / models; Access control; Inventory Management.
  • Only OEM (Original Equipment Manufacturer) spare parts are allow to be used for repairs.
  • APAVE GHANA shall have the option of providing OEM spares if not available at Client’s warehouse.

Contact Persons
Testing & Calibration Department


apaveghana@apaveoverseas.com
(233) 541 769 491 / (233) 541 769 491

image

Hess - Lifting Inspections

Apave Ghana is providing Lifting Inspections services for HESS.

...

image

Tubular & Lifting

Apave Ghana is providing Tubular and Lifting inspection services for STE ...

image

Crane Inspections

Crane Inspections services provided for MOBI CRANE in Ghana

...

image

Tubular & Calibration

Tubular inspections services as well as Calibration services provided for&nbs ...

Our Clients